We've made a handy guide to help you set up and fit your bespoke headboard.

Bed Frame Mount Installation

Step 1: Prepare the Area

Remove mattress and bedding.

Position the bed frame where you want it.

Identify and keep the headboard brackets on the bed frame accessible.

Step 2: Align the Headboard

With help if needed, hold the headboard up to the frame to align the mounting holes.

Adjust height/width to preferred position.

Step 3: Attach the Headboard

Insert bolts through the mounting holes on the headboard into the brackets on the frame.

Use washers and nuts where supplied.

Tighten all connections securely using a wrench or spanner.

Tip: Don’t fully tighten until both sides are connected, so you can make small adjustments for level.

Step 4: Final Checks

Ensure the headboard is flush and secure.

Replace mattress and bedding.

 

 Wall Mount Installation

Important: Ensure the wall is strong enough to support the weight of the headboard.

Step 1: Locate Wall Studs

Use a stud finder to locate wooden studs in the wall.

Mark the center of two or more studs at your desired height.

Step 2: Measure and Mark Mounting Points

Measure the width between the mounting brackets on the back of the headboard.

Use a level and tape measure to mark matching points on the wall.

Step 3: Install Wall Bracket

Drill pilot holes and attach mounting bracket/wall batten.

Step 4: Attach Headboard

Lift the headboard and align it with the mounted brackets.

The headboard will sit securely on top of the wall mount without any additional screws needed.